PSA 30pin
Color: Black,Red ;Customized
Pin Material: copper
SKU: 820011301
Cable Length:Customized
Pin assignment or pin out:Customized
Weight:0.13kg
OBD II adapter to specific connector for PSA Peugeot Citroen cars (30-pin).
The OBD 2 connector is a 16-pin female.
With the PSA OBD2 30-pin adapter, you can connect an OBD2 diagnostic device or a fault code reader to Peugeot and Citroen, which do not have an OBD2 connector but a 30-pin connector for the diagnostic device. The 30-pin diagnostic connector is usually found on 90s Peugeot and Citroen.
Older Peugeot and Citroen vehicles, manufactured after 1989, are equipped with a two- or thirty-pin diagnostic socket, which is mainly located in the engine compartment. Since 1996, the manufacturer gradually began to replace these old sockets with an OBD-II sixteen-pin socket, which is already located in the vehicle cabin and within reach of the driver. The two-pin diagnostic socket only allowed connection to the engine control unit and ABS. The 30-pin socket, depending on the scope of the connection, allows connection to up to 16 types of control units, reading important signals from sensors and relays or flashing error codes. The 30-pin socket can be found until the year 2000.
Compatibility
Peugeot 806 (1995-1998), Peugeot 607 (until 2001), Peugeot 605 (1989-1995), Peugeot Boxer (1994-2001), Citroen XM (1989-2001), Citroen Saxo (1996-1999), Citroen Xantia ( 1993-2001), Citroen Evasion (1994-1999), Citroen Berlingo (1996-2001), Citroen Jumpy (1996), Citroen Jumpy (1994-2001).
Note: The presence of a diagnostic socket is dependent on the engine management system and could, even during the years mentioned above, be replaced by a 16-PIN socket on specific models.
The PSA 30-PIN diagnostic adapter serves only as a reduction. It is not equipped with communication hardware that would allow the connection between the car and the PC. The connector does not contain a multiplexer that would automatically switch the pins.
Please contact us for more info.
Color | Black,Red ;Customized |
Pin Material | copper |
SKU | 820011301 |
Cable Length | Customized |
Pin assignment or pin out | Customized |
Weight | 0.13kg |
We are a professional manufacturer of OBD2 diagnostic connector /adapter and OBD2 cable.
We have many kinds of OBD2 cable and OBD2 interface available in stock, so we could produce them within only several days.
In addition, we could customise the OBD Cable OBD Connector OBD Interface OBD plug according to your requirements.
Any color, length, pinout connection are acceptable, leave an inquire to know more details about the price, package, shipping and discount.
Leave Messages
We can purchase other categories of products for you free of charge as your purchasing agent in China.
Recommended
They are all manufactured according to the strictest international standards. Our products have received favor from both domestic and foreign markets.
They are now widely exporting to 200 countries.
Copyright © 2021 ShenZhen Autodiag Technology Co., Ltd. - All Rights Reserved.